Uniform and dry SiO2 beads with the Encapsulator
Encapsulator B-390 / B-395 Pro: Manufacturing of dry spherical monodisperse SiO2 beads with a size of 430 μm
Advanced ceramic materials are of high interest due to their specific and favorable properties such as hardness, durability, optical behavior compared to traditional materials. SiO2 among other oxides such as Al2O3, TiO2 and ZrO2, are common raw materials. In the manufacturing process of advanced materials, granulation is one of the important steps. Usually, large and uniform particles are desired.This application note describes the production of spherical and uniform SiO2 beads having an average size of approximately 430 μm in diameter. The Encapsulator B-395 Pro was applied to obtain and the Rotavapor® R-300 to dry the beads. Using the presented technique, the particle size of the final beads can be varied in the range between 300 and 1000 μm.
다운로드
관련 기기
유사한 애플리케이션
Graphene-based composites for lithium batteries by spray drying
Graphene-based composites can be used to improve the electric conductivity and cycling performance of lithium batteries (LIBs). In this whitepaper, learn more about the steps needed to obtain graphene-based composites using the spray drying technique. Benefit from an illustartion of how graphene-based composites are synthesized, learn about the function of various graphene powders in battery R&D and see process parameters for spray drying of various graphene-based material.